SECAM Audio

Previous topic - Next topic

0 Members and 2 Guests are viewing this topic.

JetSetIlly

At the bottom of one the copies of the "Stella Programmer's Guide" on the Internet, there's an additional page dealing with PAL/SECAM conversions. At the very bottom of this page it says:

"PAL sounds works fine on SECAM with one exception: when a sound is to be turned off, it must be done by setting AUDV0/AUDV1 to 0, not by setting AUDC0/AUDC1 to 0. Otherwise, you get an obnoxious background sound".

Has there been any research done on this? Any ideas how the "obnoxious background sound" might sound? (I don't have a SECAM 2600 here)
https://github.com/JetSetIlly/Gopher2600
@JetSetIlly@mastodon.gamedev.place
@jetsetilly.bsky.social

alex_79

Quote from: JetSetIlly on 19 Sep 2023, 04:26 AM"PAL sounds works fine on SECAM with one exception: when a sound is to be turned off, it must be done by setting AUDV0/AUDV1 to 0, not by setting AUDC0/AUDC1 to 0. Otherwise, you get an obnoxious background sound".
I guess that has to do with RF modulation in the French "SYSTEM L", as a SECAM 2600 uses either a standard PAL or NTSC TIA (depending on the board revision).

QuoteHas there been any research done on this? Any ideas how the "obnoxious background sound" might sound? (I don't have a SECAM 2600 here)
I have a SECAM console, but the only TVs that I have that can tune a SECAM RF signal are digital ones, and they do a very poor job at it (and the console itself might need some adjustement as well, as I can only tune the channel manually and not with an autoscan).
Anyway, I'll try out in the next days and see if I can record something (e.g. using the rom in this post over at AA with various AUDC/F/V values).

JetSetIlly

Quote from: alex_79 on 19 Sep 2023, 05:08 AMI guess that has to do with RF modulation in the French "SYSTEM L", as a SECAM 2600 uses either a standard PAL or NTSC TIA (depending on the board revision).

That makes sense. If I wanted to emulate this in Gopher2600 I'd have to add an extra stage in the audio mix. I need to do a proper emulation of the television first, though.
https://github.com/JetSetIlly/Gopher2600
@JetSetIlly@mastodon.gamedev.place
@jetsetilly.bsky.social

Andrew Davie

Quote from: JetSetIlly on 19 Sep 2023, 05:11 PMThat makes sense. If I wanted to emulate this in Gopher2600 I'd have to add an extra stage in the audio mix. I need to do a proper emulation of the television first, though.


I would certainly hope you're gonna support the two people in the entire world running '2600 on a SECAM CRT ;) It's an important thing!

JetSetIlly

Quote from: Andrew Davie on 19 Sep 2023, 08:21 PMI would certainly hope you're gonna support the two people in the entire world running '2600 on a SECAM CRT ;) It's an important thing!

Haha. I like the idea of emulation being a way of representing all the nuances of a machine's history, no matter how odd.
https://github.com/JetSetIlly/Gopher2600
@JetSetIlly@mastodon.gamedev.place
@jetsetilly.bsky.social

alex_79

Quote from: alex_79 on 19 Sep 2023, 05:08 AMI'll try out in the next days and see if I can record something (e.g. using the rom in this post over at AA with various AUDC/F/V values).
I tested the console but unfortunately I have nothing to report: the image is noisy and the sound has a continuous background hiss that I can hear if I crank up the TV's volume, but there's no audible change with different AUDVx/AUDCx combination. I don't hear the "obnoxious background sound" described in the Stella Programmer's Guide with AUDCx set to zero and AUDVx to the max.

I guess the digital tuner won't do, and a "real" vintage SECAM TV is needed to test this.

JetSetIlly

Quote from: alex_79 on 20 Sep 2023, 04:55 AMI tested the console but unfortunately I have nothing to report: the image is noisy and the sound has a continuous background hiss that I can hear if I crank up the TV's volume, but there's no audible change with different AUDVx/AUDCx combination. I don't hear the "obnoxious background sound" described in the Stella Programmer's Guide with AUDCx set to zero and AUDVx to the max.

I guess the digital tuner won't do, and a "real" vintage SECAM TV is needed to test this.

Thanks for checking :-) We'll keep it in the back of our minds and perhaps one day we'll learn more about it.
https://github.com/JetSetIlly/Gopher2600
@JetSetIlly@mastodon.gamedev.place
@jetsetilly.bsky.social